iQ-LED V2 technology is a light source that is capable of generating custom spectra to replicate various light sources in a test lab environment. As with our other iQ-LED products, the iQ-Flatlight uses 20 LED-channels to emulate almost any light spectrum for your camera testing. Each light contains ten individual iQ-LED V2 elements that allow for maximum intensity of 2000 lux per pair on the chart plane and a spectral range of 380 to 820 nm.
With the introduction of iQ-LED V2, it is now possible to control the functionality of the lights without the use of a PC. You can store up to 44 different illuminants, and one sequence on the device (controllable via microswitches on the device itself).
The iQ-Flatlight uses a mini-spectrometer with a spectral range of 350 – 860 nm to ensure better spectral resolution and higher sensitivity. The spectrometer is also able to calibrate the lights.
It is also the perfect complement for VCX testing. All of the light sources outlined in the VCX white paper can be recreated with the iQ-LED, which allows for more efficient VCX mobile phone testing.
The iQ-Flatlight is always sold as a pair of two and includes iQ-LED control software (which has predefined standard illuminants) and a height-adjustable rolling cart for each light. We also offer an iQ-LED API as a separate option.
Each iQ-Flatlight is available with the standard 10 iQ-LED modules. We also offer the option of adding three fluorescent tubes to each light for basic fluorescent illumination.
iQ-Flatlight AW (currently under development)
The iQ-Flatlight AW expands the iQ-Flatlight series using variable correlated color temperatures (CCT). It will replace the pervious iQ-Flatlights that only used fluorescent tubes. Using adaptive white (AW) technology, this version is available with CRI > 90 or CRI ≥ 95. The iQ-Flatlight AW offers a perfect light source for test labs looking for a more basic solution for reflective chart illumination.
Contact our sales department for details and special offers.
iQ-LED V2 技術是一種能夠產生定制光譜的光源,可在測試實驗室環境中複製各種光源。與我們的其他 iQ-LED 產品一樣,iQ-Flatlight 使用 20 個 LED 通道來模擬幾乎任何光譜,用於相機測試。每盞燈都包含 10 個獨立的 iQ-LED V2 元件,可在圖表平面上實現每對 2000 lux 的最大強度,光譜範圍為 380 至 820 nm。
隨著 iQ-LED V2 的推出,現在無需使用個人電腦即可控制照明燈的功能。您可以在設備上存儲多達 44 種不同的光源和一個序列(可通過設備本身的微動開關進行控制)。
iQ-Flatlight 使用一個光譜範圍為 350 – 860 納米的微型光譜儀,以確保更好的光譜分辨率和更高的靈敏度。光譜儀還可以對燈光進行校准。
它也是 VCX 測試的完美補充。VCX 白皮書中概述的所有光源都可以通過 iQ-LED 重新創建,從而實現更高效的 VCX 手機測試。
iQ-Flatlight 始終以一對兩台的形式銷售,包括 iQ-LED 控制軟件(其中有預定義的標準光源)和一個高度可調的滾動推車。我們還單獨提供 iQ-LED API。
每個 iQ-Flatlight 都有標準的 10 個 iQ-LED 模塊。我們還提供為每盞燈增加三個螢光燈管的選項,以實現基本的螢光照明。
iQ-Flatlight | |
---|---|
Principle | Diffuse light panel to illuminate reflective test charts and surfaces based on iQ-LED V2 technology |
Light sources | 10 x iQ-LED V2 each with 41 SMD high power LEDs separated into 20 color channels Spectral range: 380 – 820 nm |
Intensity | Controlled via 4000 steps per channel and 32 kHz PWM (switchable to 1000 steps with 128 kHz) |
Uniformity | > 90% (with two iQ-Flatlights in ~1.5 m distance, depending on test setup) |
Illumination stability | +/- 1% when stabilized (2% after switching D illuminants in the first 5 s) |
Response time | < 50 ms |
Dim function | iQ-LED: Software-based by presetting the intensity while the calibration device is in the measurement position, or by selecting different pre-stored intensity illuminants directly on the device |
Predefined standard illuminants | D50, D55, D65, D75, A, B, C, E |
Service life | 10,000 h (iQ-LED V2) |
Power supply | 210 – 230 V / 950 W |
Dimensions (W x H x D) | 870 x 1530 – 1830 x 710 mm (300 mm height adjustable) |
Weight | 65 kg |